Changing Conservatory Door Handles
Switching your handles for your conservatory doors is a simple task that most people are able to do themselves. It is essential to know if the handles you have are sprung or not.
We stock a large range of replacement handles that will fit all the major uPVC double-glazing manufacturers like Hoppe, Mila, Avocet and Fab 'n'Fix. You need to take two crucial dimensions to select the correct handle. This is the distance between the screw fixing centers and the center of the keyhole (also called PZ centres).
Lever/lever
When you're installing new uPVC doors into your conservatory you may wish to change the handle design. Not only does the look of your handles make a difference to the appearance of your space, but it also affects the level of security you'll need. The good news is that changing a door handle is a relatively simple job that the majority of people can handle themselves within five minutes.
Before you start this process it's important to ensure that the door is shut and secure to allow you to work safely. After that, you'll need take off the handle and cylinder lock. Once the handle and cylinder lock are removed, you will need mark the screw holes on your back plate. This will assist you find the precise spot to screw in the handle replacement. Once marked you can then utilize these measurements to select the suitable handle for your uPVC door.
The lever, screws, and pad spindles are located inside the lock case (which is inside the door) therefore it is impossible to change any handle without ensuring that they match with each other. This is the reason it's important to take accurate measurements before purchasing a new set of handles.
Info 'll also need to determine Top Screw to Spindle Distance and PZ Dimension (centre of euro hole for cylinders). The next step is to find the perfect uPVC door handles for your property. We've put together a handy guide to measuring door handles that will help you.
Lever/lever door handles are the most commonly used kind of handle and come in a range of different styles and finishes. For instance, you can find graphite, brushed nickel oil-rubbed bronze, matte black handles to match your decor. These handles are suitable for commercial and domestic applications and are available on a variety of uPVC door styles and sizes.
If you're looking to make your uPVC door more secure, choose a door handle that comes with a locking mechanism. This adds an additional layer of security to your home, and is particularly useful for external doors. These handles come with a range of locking options, including keyed alike locks or dummy doors. lock.
Certain lever handle sets can be used either on the left or right side of the door. However, others aren't and must be specifically ordered for your door orientation. We suggest checking that the lever set you purchase is handed before ordering because some brands like Schlage only supply reversible handles for standard doors.
Un-sprung
As the name suggests that these kinds of door handles made of upvc don't incorporate a spring cassette within their back plate. They depend on the force applied to them by the latch/multi-point lock to return their lever to the horizontal position after use. In time, this could cause the handles to droop.
If you're experiencing problems with the handle, the spring in the cassette is likely worn out and must be replaced. You can check by removing the handle, then using the lever. If the handles droop, this indicates that their spring strength has been lost. It is essential to install high-quality locks and latches with the doors you replace to stop this from occurring.
The majority of replacement handles have spring cassettes in the backplate that holds the lever. They work with a standard or multi-point latch to ensure that the door handles return to the horizontal position after use. This is a vital feature since it is more difficult to operate the handles with no springs in the event that they do not return to the optimum position.
There are a few upvc handles that aren't equipped with the spring cassette. These will need to be fitted heavy duty locks/latches. They are more prevalent in older door handles made of upvc that have not been upgraded for a number of years.
Once you have the proper handle type selected and it is the correct length to fit your upvc doors it's a case of fitting it in accordance with the directions given. Make sure that the screw holes are aligned on the handle's exterior with the holes that are already in the euro profile cylinder. Then insert the spindle that is supplied and tighten the screws. Repeat the process to install the handle inside.
A crucial point to remember is that the cylinders provided with these handle sets are not typical cylinders that are used in modern multi-point locks. They have a smaller diameter and will require the larger, bulb-shaped the cylinders that are typically found on older multi-point doors. They can be found at your local locksmith, or online. It is an expense in addition to the new upvc handles and is only necessary if your double-glazed door is fitted with old multi-point locks. Cylinders are included in the majority of the upvc handle sets available as they are the most popular size. It is a good idea however, to have spare cylinders in case they are lost or broken. You'll save time as well as money by not needing to purchase a new handle set. This will also allow you to use the same cylinder for repair of your current upvc handles when the spring inside the internal handle cassette breaks or wears out. This can happen when too much force is pushed when using the door handles, particularly by elderly or children.